Panasonic PT-LB1E, LB1U, LB1EA manual Status, Initialize, Network setting of the projector cont

Network setting of the projector (cont.)

STATUS

Your current settings appear.

Select [STATUS] in the NETWORK menu and press the [ENTER] button.

PICTURE

POSITION

LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

SECURITY NETWORK

WIRED LAN
NAME CHANGE
NETWORK CONTROL	ON
STATUS
INITIALIZE

SELECT

RETURN

ENTER

FUNCTION

The status of the following will appear.

NETWORK

DHCP	“ON” - “OFF”
IP ADDRESS	(See page 6)
SUBNETMASK	(See page 6)
DEFAULT GATEWAY	(See page 6)
MAC ADDRESS	—

MAC ADDRESS : “Glossary” (See page 18)

INITIALIZE

You can reset the network settings to the factory default settings of the projector.

11 Select [INITIALIZE] in the NETWORK menu and press the [ENTER] button.

PICTURE

POSITION

LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

SECURITY NETWORK

RETURN

SELECT

ENTER

WIRED LAN
NAME CHANGE
NETWORK CONTROL	ON
STATUS
INITIALIZE

The entry of the password is prompted if [PASSWORD] is turned [ON] in the “ SECURITY” menu.

22 Select [OK] with the [◄►] buttons and press the [ENTER] button.

	INITIALIZE
	INITIALIZE
OK	CANCEL
	RETURN

SELECT

ENTER

8