Using WebBrowser (cont.)
Monitor information window
This page indicates the projector status.
To access this page from other pages, click [Status] in the main menu (at the left of the window).
| |
Projector status | Network status |
On this window, click the [Projector status] tab. | On this window, click the [Network status] tab. |
The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] → [Refresh].
If [SELF TEST Error (Detail)] appears on the Monitor information window, click it to view the error details.
|
|
If [FAILED] appears |
|
Item | Description |
MAIN CPU BUS | There is a problem with a microcontroller circuit. Contact your dealer. |
FAN | There is a problem with the fan or fan drive circuit. Contact your dealer. |
INPUT AIR TEMPERATURE | Input air temperature is high. The projector is likely being used in a high temperature |
| environment such as near heating equipment. |
OUTPUT AIR TEMPERATURE | Temperature surrounding the lamp is high. The exhaust vent is likely blocked. |
LAMP REMAIN TIME | The lamp has been used for longer than its rated useful life, and it is time to replace it. |
LAMP STATUS | The lamp could not be lit. |
| Allow the bulb of the light source to cool, and then turn on the projector. |
INPUT AIR TEMP.SENSOR | There is a problem with the air intake temperature sensor. Contact your dealer. |
OUTPUT AIR TEMP.SENSOR | There is a problem with the exhaust temperature sensor. Contact your dealer. |
BATTERY | The battery must be replaced. Contact your dealer. |
AIR FILTER | The remaining filter gets low. |
| For further detail, see the Basic Manual. |
11
