Panasonic LB1EA, LB1U manual Check your computer, Connecting with Wired LAN, Turn on the computer

Make the network setting according to your system administrator.

If the projector settings are the default settings (See page 6), the computer can be used with the following network settings.

Check your computer

Necessary environment for computers to be connected

•• First, check your computer to see whether or not it has a wired LAN function.

LAN : “Glossary” (See page 18)

•• Before connecting the computer to the projector, be sure to check the following settings.

Check 1  For LAN cable

•• Is the cable properly connected?

•• Use LAN cable that is compatible with category 5 or above.

Check 2  Wired LAN settings

<Computer with a built-in wired LAN function>

•• Is your wired LAN switched on?

<Computer without a built-in wired LAN function>

•• Is your wired LAN adapter properly recognized?

•• Is your wired LAN adapter switched on?

•• Install the wired LAN adapter driver beforehand.

For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.

Check 3  For WebBrowser

•• WebBrowser is necessary to use WEB control.

•• Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0

Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our hand (body) causing a malfunction.

Connecting with Wired LAN

Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing any settings.

11 Turn on the computer.

22

IP ADDRESS	192.168.10.101
SUBNETMASK	255.255.255.0
DEFAULT GATEWAY	192.168.10.1

4