Panasonic LB1U, LB1EA, PT-LB1E manual Network setting of the projector cont, Wired LAN settings

Network setting of the projector (cont.)

NETWORK

Wired LAN settings

You can make detailed wired LAN settings.

11 Select [WIRED LAN] in the NETWORK menu and press the [ENTER] button.

WIRED DETAILED SETUP

CANCEL

SELECT

DHCP	OFF
IP ADDRESS
	192.168.	10.100
SUBNETMASK	255.255.255.		0
DEFAULT GATEWAY
	192.168.	10.	1

OK CANCEL

	DHCP
	ON:	If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
		acquired.
	OFF:	If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
		ADDRESS ], [SUBNETMASK ] and [DEFAULT GATEWAY ].
	“Glossary” (See page 18)
22	Select each item with the [▲▼] buttons and change the settings following the
	menu’s Operating guidance.
33	Select [OK] with the [▲▼] buttons and press the [ENTER] button.

Default network settings

The following settings are set before the projector leaves the factory.

DHCP	OFF
IP ADDRESS	192.168.10.100
SUBNETMASK	255.255.255.0
DEFAULT GATEWAY	192.168.10.1

6