Removing Belt
Tabs |
Languettes |
Pestaña |
Agitator Cover |
Couvercle de l’agitateur |
Cubierta del agitador |
➢Disconnect vacuum cleaner from electrical outlet.
➢Check and remove hair, string and lint
➢If
➢Turn POWER NOZZLE over.
➢Unscrew the two (2) POWER NOZZLE cover screws.
➢Turn POWER NOZZLE right side up.
➢Press handle release pedal and lower the swivel.
➢To remove cover, grasp the sides and pull out.
➢Tilt cover forward from back until front snaps free.
➢Depress tabs on rear of agitator cover and rotate forward to release from the POWER NOZZLE base.
➢Lift agitator assembly out .
➢Remove worn belt.
| Base |
| Base |
Agitator Support | Base |
| |
Support de l’agitateur |
|
Soportes del agitador |
|
| - 48 - |
Agitator Assembly
Belt Pulley
End Cap
End
Cap
Brush Unit