Replacing Brushes
Card |
Carte |
Tarjeta |
Bride en E Sujetador de E
Agitator Shaft | Right End Cap | |
Abre d’entraînement | ||
Eje del agitador | Bouchon droit | |
| Tapa del extremo | |
| derecho | |
Agitator Pulley | Agitator Support | |
Support de l’agitateur | ||
Poulie de l’agitateur | ||
Soporte del agitador | ||
Polea del agitador | ||
|
Push Off
Pousser
Enpuje hacia fuera
Brush
Brosse
Cepillo
➢When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced.
➢Remove lower plate and agitator.
➢Remove the
➢Do not bend agitator shaft or lose E- clip or spacer.
➢Pull agitator shaft out of agitator body.
➢Pull, or pry out, agitator holder and agitator pulley.
➢Push each brush out of agitator body as shown.
➢Install new brushes by reversing procedure.
➢Reinstall agitator holder and agitator pulley completely.
➢Reinstall the agitator shaft, end cap and
➢See exploded view for correct assembly of parts.
➢Position belt over agitator pulley on the agitator.
➢Reinstall agitator and lower plate.
- 42 -