Panasonic MC-V5209 Replacing Brushes, Card, E-Clip, Agitator Shaft, Right End Cap, Push Off

Replacing Brushes

Card

Carte

Tarjeta

E-Clip

Bride en E

Sujetador de E

Agitator Shaft

Arbre d’entraînement	Right End Cap
Eje del agitador	Bouchon droit
	Tapa del extremo
	derecho

Agitator Pulley	Agitator Holder
	Soporte del agitador
Polea del agitador
	Support de l'agitateur
Poulie de l’agitateur

Push Off

Pousser

Empuje hacia fuera

Brush

Brosse

Cepillo

➢When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced.

➢Remove lower plate and agitator.

➢Remove the E-clip from agitator shaft and end cap.

➢Do not bend agitator shaft or lose E- clip.

➢Pull agitator shaft out of agitator body.

➢Pull, or pry out, agitator holder and agitator pulley.

➢Push each brush out of agitator body as shown.

➢Install new brushes by reversing procedure.

➢Reinstall agitator holder and agitator pulley completely.

➢Reinstall the agitator shaft, end cap and E-clip.

➢See AGITATOR ASSEMBLY for correct assembly of parts.

➢Position belt over agitator pulley on the agitator.

➢Reinstall agitator and lower plate.

- 34 -