Agitator Assembly
|
| Brush |
| Brushes | Spacers (3) |
| Agitator | Filter |
Filter | Holder |
|
End Cap
Agitator | Spacer | End Cap |
| ||
|
| |
Pulley |
|
|
Removing Clogs
Hose
Tuyau
Manguera
Cover (Suction Inlet)
Couvercle
(Entrée d’aspiration)
Cubierta
(Abertura de aspiración)
Short Hose
Tuyau court
Manguera corta
+ | Short Hose |
Tuyau court
Manguera corta
Hose Fitting
Raccord du tuyau
Conexión para manguera
The hose located on the back of the vacuum cleaner carries the dirt from the nozzle up to the dust bag. If the hose should become clogged:
➢Unplug vacuum.
➢Pull open suction inlet cover and check for clogging.
➢Disconnect wand from short hose and check wand and hose.
➢Plug in vacuum cleaner and turn on.
➢Disconnect wand and stretch hose in and out to remove clog.
➢If clog still exists, turn vacuum cleaner OFF and UNPLUG POWER CORD.
➢Remove lower plate.
➢Remove short hose from nozzle by lifting straight up.
➢Inspect hose end and clear any obstructions.
➢Reinstall short hose and lower plate.
- 36 -
