- 30 -

Replacing Belt

Limpieza para orillas

Nettoyage latéral
Use la característica de limpieza para
orillas para aspirar con facilidad cerca
de las paredes y los muebles.
Cette caractéristique facilite le
nettoyage de moquettes le long des
plinthes ou des meubles.
Se abre automáticamente para proveer
el aire fresco al motor cuando hay unos
residuos o cuando es necesario
cambiar la bolsa de polvo.
Es posible que el protector del motor se
abra cuando se usan las herramientas
Si se abre el protector del motor, la
aspiradora hará un sonido poquito
diferente.
Nota: No obstruye el protector de motor.

Protector del motor

Protecteur du moteur

Características

Caractéristiques

La soupape s'ouvre automatiquement
pour refroidir le moteur en cas d'obstruction
ou lorsque le sac à poussière est plein.
La soupape peut s’ouvrir aussi lors de
l’utilisation des accessoires.
Si la soupape devait s'ouvrir, le bruit
normalement émis par l'aspirateur sera
quelque peu différent.
Remarque: Ne pas bloquer le protecteur
du moteur.
- 19 -
Agitator Holder
Support de lagitateur
Soporte de lagitador
Lift Agitator Up
Soulever lagitateur
Unidad del agitador
Belt Cover
Couvercle de
la courroie
Cubierta de
la banda
Install
New Belt
Poser la
nouvelle
courroie
Instalación
de la correa
Motor Shaft
Arbre dentraînement
du moteur
Eje del motor
Groove
Ouverture
Ranura
End Cap
Bouchon
Tapa de
extremo
Replace belt whenever a burning
rubber smell caused by excessive
slippage occurs.
Remove lower plate.
Lift rear belt cover and remove
agitator holder.
Remove agitator by carefully lifting
out.
Remove worn or broken belt.
Clean agitator.
Loop new belt (Panasonic Type UB8
only) around motor shaft and
agitator pulley.
Reinstall agitator back into nozzle
housing grooves.
Close rear belt cover and reinstall
agitator.
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
Reinstall lower plate. (See Removing
and Installing Lower Plate, page 28).