WARNING Electrical Shock or Personal Injury Hazard

Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.

Removing and Installing Lower Plate

Latches

Loquets

Lengüetas

Belt Cover

Couvercle de la courroie Cubierta de

la correa trasera

Lower Plate

Plaque inférieure

Base inferior

Lower Plate

 

 

Plaque inférieure

 

 

Base inferior

 

 

Belt Cover

 

 

Couvercle de la

 

 

courroie

Tabs

Latches

Cubierta de

la correa trasera

Languettes

Loquets

 

Lengüetas

Lengüetas

Before servicing any parts, disconnect vacuum cleaner from electrical outlet.

Place paper under nozzle whenever lower plate is removed to protect floor.

Place handle in upright position and turn vacuum cleaner over to expose lower plate.

Release lower plate by pressing two

(2) latches inward.

Remove lower plate and remove any residue that may exist in belt area.

Lift belt cover to replace belt if necessary. (See Replacing Belt page 30).

Close the rear belt cover and reinstall lower plate by hooking front end of lower plate into the front of nozzle housing.

Make sure all wires are routed properly and not pinched.

Press lower plate into place then push two (2) latches outward.

- 28 -

Page 28
Image 28
Panasonic MC-V5210 manuel dutilisation Removing and Installing Lower Plate, Tabs Latches