Panasonic MC-V5239 Routine Care Of Cleaner, Replacing Secondary HEPA Filter, Changing Dust Bag

Models: MC-V5239

1 44
Download 44 pages 49.88 Kb
Page 20
Image 20
ROUTINE CARE OF CLEANER

ROUTINE CARE OF CLEANER

Performing the following tasks will keep your new Panasonic vacuum cleaner operating at peak performance levels and will ensure these high levels for years to come. Check the BEFORE REQUESTING SERVICE section in this manual for recommendations on performing some of these tasks to help solve various problems that may occur.

Replacing Secondary HEPA Filter

Secondary HEPA Filter

(White Side Up)

Filtre secondaire de type HEPA (Côté blanc sur le dessus) Filtro de HEPA secundario (Blanca hacia arriba)

Rib Projections

Rainures

Lengüetas

Secondary HEPA filter protects the motor.

Check filter when installing a new dust bag.

If dirty, pull filter from bottom of dust compartment and replace.

Place new filter, white side up, in dust compartment, DO NOT CLEAN WITH WATER*.

Ensure filter is fully inserted under plastic rib projections.

*Filter cannot be cleaned and should be replaced at least once each year.

Changing Dust Bag

Always operate vacuum with genuine Panasonic Type U3 Standard or U6 Electrostatic dust bags installed. Panasonic dust bags may be purchased through any authorized Panasonic dealer or ordered from service company.

1)

Pull outward on dust cover grip to remove the dust cover.

2)

Remove dust bag by grasping cardboard portion and pulling out.

- 20 -

Page 20
Image 20
Panasonic MC-V5239 operating instructions Routine Care Of Cleaner, Replacing Secondary HEPA Filter, Changing Dust Bag