Replacing Headlight Bulb
+ |
Bulb Socket Assembly |
Assemblage de la lampe |
Casquillo portalámparas |
➢Remove lower plate.
➢Remove bulb socket screw, grasp the bulb socket assembly and pull upward while moving it back and forth.
➢Remove old bulb from the bulb socket assembly by pushing in while turning
➢Replace bulb by pushing in while turning clockwise.
➢Only use a bulb rated 130 V
➢Reinstall bulb socket assembly into nozzle housing by pushing it back down into slot and reinstall bulb socket screw.
➢Reinstall lower plate.
Replacing Belt
+
+ |
+
Lift Agitator Up
Felt Packing | Soulever l’agitateur | |
Unidad del agitador | ||
Cale en feutre | ||
| ||
Empaquetadura |
| |
de fieltro |
|
| + | |
Motor Shaft | Install | |
Arbre d’entraînement | ||
New Belt | ||
du moteur | ||
Poser la | ||
Eje del motor | ||
nouvelle | ||
| ||
| courroie | |
| Instalación | |
| de la correa |
➢Replace belt whenever a burning rubber smell caused by excessive slippage occurs.
➢Remove lower plate.
➢Lift rear belt cover and remove felt packing.
➢Remove agitator by carefully lifting out.
➢Remove worn or broken belt.
➢Clean agitator.
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing.
- 26 -
