Panasonic MC-V5239 operating instructions Replacing Brushes

Replacing Brushes

Card

Carte

Tarjeta

➢When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced.

➢Remove lower plate and agitator.

	E-Clip
	Bride en E
	Sujetador
	de E
Agitator Shaft	Right End Cap
	Bouchon droit
Arbre d’entraînement	Tapa de extremo
Eje del agitador	derecho

Belt Pulley	Agitator Holder
Poulie de	Soporte del agitador
la courroie	Support de l'agitateur
Polea para
correa

Push Off

Pousser

Empuje hacia Brush

fueraBrosse Cepillo

➢Remove the E-clip from agitator shaft and end cap.

➢Do not bend agitator shaft or lose E- clip.

➢Pull agitator shaft out of agitator body.

➢Pull, or pry out, agitator holder and agitator pulley.

➢Push each brush out of agitator body as shown.

➢Install new brushes by reversing procedure.

➢Reinstall agitator holder and agitator pulley completely.

➢Reinstall the agitator shaft, end cap and E-clip.

➢See exploded view on page 32 for correct assembly of parts.

➢Position belt over agitator pulley on the agitator.

➢Reinstall agitator and lower plate.

- 30 -