WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.
Removing and Installing Lower Plate
Latches
Loquets
Lengüetas
Rear Belt
Cover
Couvercle de la courroie Cubierta de la correa trasera
Lower Plate
Plaque inférieure
Base inferior
➢Before servicing any parts, disconnect vacuum from electrical outlet.
➢Place paper under nozzle any time lower plate is removed to protect floor.
➢Place handle in upright position and turn vacuum over to expose lower plate.
➢Release lower plate by pressing two
(2) latches inward.
➢Remove lower plate and remove any residue that may exist in belt area.
➢Close the rear belt cover and reinstall lower plate by hooking front end of lower plate into slots on front of nozzle housing.
➢Make sure all wires are routed properly and not pinched.
➢Press lower plate into place then push two (2) latches outward.
- 24 -
