Replacing HEPA Exhaust Filter
HEPA
Exhaust Filter
and Frame
Filtro de escape
HEPA y el marco Filtre d’évacuation (HEPA) et cadre
Retainers
Lengüetas
Taquets
Dust
Cover
Cubierta
de polvo Couvercle
➢The HEPA exhaust filter removes dirt from recirculated air.
➢Check filter when installing a new dust bag.
➢If dirty, remove filter from bottom of the dust cover by pulling straight up on retainers on frame. Lift one side at a time.
➢Place new filter in dust cover DO NOT CLEAN WITH WATER*.
➢Place filter in frame and install in dust cover. For proper operation the white side must face dust cover grill.
*Filter cannot be cleaned and should be replaced at least once each year.
Changing Dust Bag
Always operate vacuum with genuine Panasonic Type U3 Standard or U6 Electrostatic dust bags installed. Panasonic dust bags may be purchased through any authorized Panasonic dealer or ordered from service company.
POWER CO NTROL
MAX
1)
➢ Pull outward on dust cover grip to remove the dust cover.
2)
➢ Remove dust bag by grasping cardboard portion and pulling out.
- 28 -
