Replacing Belt
Motor Shaft | Belt |
Arbre du moteur | Courroie |
Eje del motor | Correa |
| Agitator |
| Agitateur |
| Agitador |
Belt |
|
Courroie |
|
➢ Replace belt whenever a burning |
rubber smell caused by excessive |
slippage occurs. |
➢ Place |
CARPET position. |
➢ Remove lower plate. |
➢ Remove agitator by carefully lifting |
out. |
Correa |
Motor Shaft 
Arbre du moteur
Eje del motor
Carpet/Bare
Floor Selector
Shaft
Arbre d'entraînement du sélecteur tapis/plancher Selector
Belt Groove
Rainure de la courroie Polea para correa
➢ Remove worn or broken belt. |
➢ Loop new belt (Panasonic Type UB8 |
only) around motor shaft and brush |
pulley; see illustration for correct |
belt routing. |
Belt |
|
Courroie |
|
Correa |
|
| Agitator |
End Cap | Agitateur |
Bouchon | Agitador |
Tapa del extremo |
|
Lower Plate | Tabs |
Plaque inféreure | Languettes |
Base inferior | Lengüetas |
➢Clean agitator and reinstall the two
(2) end caps.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate. Ensure tabs are locked into slots.
- 48 -
