Removing Belt
Tabs
Lenguettes
Pestaña
Agitator Cover
Couvercle de l’agitateur Cubierta del agitador
Base
Agitator Support
Support de l’agitateur
Soportes del agitador
➢Disconnect cleaner from electrical outlet.
➢Check and remove hair, string and lint
➢If
➢Turn POWER NOZZLE over.
➢Unscrew the two (2) POWER NOZZLE cover screws .
➢Turn POWER NOZZLE right side up.
➢Press handle release pedal and lower the swivel.
➢To remove cover, grasp the sides and pull out.
➢Tilt cover forward from back until front snaps free.
➢Depress tabs on rear of agitator cover and rotate forward to release from the POWER NOZZLE base.
➢Lift agitator assembly out
➢Remove worn belt.
Agitator Assembly
Belt Pulley
End Cap
End
Cap
Brush Unit
- 40 -