Moving and installing (continued)
Moving the washing machine from one location to another
Make sure to fix the anchor bolts for transportation to the washing machine.
Before you move the washing machine
●Shut the tap and run the washing machine to drain the water. Drain any remaining water from the pump hose. (see page 29)
●Depressurise the
●Attach the anchor bolts (see below).
Attaching the anchor bolts
Unscrew and remove the four cover caps.
How to install Moving
Same level |
4
3
2
1
Pull the bolts out, so their tips are level with the tips of the sleeves.
(Ask someone else to hold the upper surface of the drum and pull it forward.)
Insert the transportation guards 1, 2, 3 and 4.
and installing
26 mm
Tighten each bolt.
Tighten the bolt so that spring length becomes 26mm.
35
2009/08/05 | 11:34:18 |
|
|
|
|
|
| ||
|
|
| ||
|
|
|
|
|
