Moving and installing

Removing the anchor bolts

Four anchor bolts keep the interior of the washing machine in place while it’s being moved. They need to be removed before installation, using the spanner supplied and following the instructions below.

Don’t run the washing machine without removing the bolts, as this can cause excessive vibration.

AB

●To remove the anchor bolts:

Use the ‘B’ end of the spanner to loosen the four bolts.

Pull the bolts out horizontally.

Remove the screws which are alongside the bolt holes.

Push the four cover caps (included with your accessories) onto the respective bolt holes, and secure them with the screws you removed in step .

You’ll need the anchor bolts again if you move the washing machine, so make sure you keep them safe. And if the washing machine passes to someone else, make sure you give them the anchor bolts.

34

NA-16VX1_E.indb 34

2009/08/05

11:34:15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 34
Image 34
Panasonic NA-16VG1, NA-16VX1, NA-14VA1 operating instructions Moving and installing, Removing the anchor bolts