How to Operate NE - 3280/NE - 2180/NE - 1880
◆Single stage heating
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 14 - 15)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking at DEFROST power for 1 minute into Memory pad “5”
1
2
3
4
5
6
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
|
|
|
Keep the door closed.
☛Digital Display Window must be blank or show “0”.
Press Program Entry Switch. | PROG |
☛“PROG” will start to blink.
PROG
| Press Memory pad you wish to program. | A |
|
| PROG |
5 | ☛ The selected pad number will appear and currently programmed |
|
| 1 | |
| information will be indicated. |
|
| Press Power Level Selector pad four times. | A |
|
| PROG |
☛ The selected power level will be indicated, “PROG” and 1st Stage
1
Heating Indicator “1” will start to blink.
| Set the desired heating time using Timer Dial. |
|
| A | ||
|
|
|
|
|
| PROG |
| ☛ The set heating time will appear. |
|
| 1 | ||
| Note: up to 15 min. on | or | , 60 min. on | , | or |
|
| Press Program Entry Switch again. |
|
| A | ||
|
|
|
|
|
| PROG |
| ☛ “PROG” and 1st Stage Heating Indicator “1” will stop blinking. | 1 | ||||
PROG | This means that you have completed programming. |
|
| |||
•Three seconds later, Digital Display Window will go blank.
Note:
•Program the remaining Memory pads as desired by repeating steps
• When you want to select Memory Area B, press Memory Shift pad A B before selecting the desired Memory pad.
- 13 -