Outline Diagram NE - 1540

ProΙΙ

AC

PROG BUZZ

PROG

B

D

Digital Display Window Power Level Indicator Display Power Level Selector Dial Timer Dial Start Button Door Handle Oven Lamp Cover Air Filters Program Entry Switch (behind Air Filter) Buzzer Switch (behind Air Filter) Middle ShelfA - Program DisplayB - Beep Tone Mode DisplayC - Heating Time Display (min. sec.) D - Power Level IndicatorHIGHMEDIUMLOW DEFROST

How to Operate NE - 1540

A. MANUAL HEATING

Example: To cook food at HIGH power for 2 minutes

1

2

3

4

PAD

INSTRUCTION

DIGITAL DISPLAY WINDOW

 

 

 

Open the door and put the food in the oven.

☛ The oven lamp will turn on. “0” and Power Level Indicator will appear.

Select the desired Power Level by turning the Power Level Selector

Dial.

Set the desired heating time.

☛ The heating time will appear in the digital display while turning the Timer Dial.

Note: up to 60 minutes.

Press Start Button.

☛ The oven lamp will turn on and heating will start. Power Level Indicator will start to blink, and heating time will count down.

•At the end of the time, the beep tone will sound and all heating will stop. The oven lamp will go off. 1 minute later the cooling fan will stop. The display will blink “0” until the door is opened.

•Open the door and take the food out. “0” will appear in the display window and the Power Level will be displayed. The oven lamp will be turned on.

•Close the door. The oven lamp will go off and 1 minute later the display window will go blank.

•When you press the Start Button with door open, “0” will appear in the display in all cases.

•Even after setting the heating time you can still change the power level.

•If you wish to change the heating time during heating, simply adjust the timer to desired minutes and seconds. The microwave oven can also be turned OFF by turning the Timer Dial to the left until “0” appears in the digital display and beep tone can be heard.

-7 -