How to Operate NE - 3280/NE - 2180/NE - 1880
◆To Release Program Lock:
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
|
|
|
|
1 |
| Keep the door closed. |
|
|
| ☛ Digital Display Window must be blank. |
|
|
|
|
|
2 |
| Press Program Lock Switch until “PROG” and “P” appear. | PROG |
|
| ||
|
| (for five seconds) |
|
| PROG LOCK | ☛ “PROG” and “P ” will appear. |
|
|
|
|
|
In Program Unlock mode:
•Oven reverts to a
•Repeat and interrupt feature are operational.
•Memory pads can be programmed.
•Tone loudness control and length control are operational.
E. BEEP TONEThe loudness of beep tone and the length of beep tone at the end of heating cycle can be set. There are four levels of the loudness.
There are two options of the length of beep tone at the end of heating cycle. The loudest level and 3 beeps are preset at the factory.
◆To Select Loudness Level and Length “3 beeps”:
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 | Press Program Entry Switch. | PROG |
☛“PROG” sign will start to blink in the display window. (The door may be
PROG | open or closed at this stage) |
|
2 | Press Buzzer Switch. | PROG |
☛ The tone will sound at its loudness level and the loudness level “3”
1
BUZZfollowed by the word “bEEP” will appear. “PROG” will start to blink and 1st Stage Heating Indicator “1” (the length of beep tone “3 beeps”) will be indicated.
Note: Repeatedly pressing the Buzzer Switch will lower the loudness level all the way to silent. (3bEEP
3 | Press Program Entry Switch again. | PROG |
| ☛ “PROG” will stop blinking. That means that you have completed | 1 |
PROG | program. |
|
| Three seconds later, the display window will go blank when the door is |
|
| closed. |
|
- 15 -