How to Operate NE - 3280/NE - 2180/NE - 1880
◆To Select Length of Tone “short beeps for 60 seconds”:
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
4 | Follow step | PROG |
|
| 1 |
5 | Within three seconds after pressing Program Entry Switch at step 3, | PROG |
| press Buzzer Switch. | 2 |
BUZZ | ☛ “PROG” will start to blink and 2nd Stage Heating Indicator “2” (the |
|
| length of beep tone “short beeps for 60 seconds”) will be indicated. |
|
6 | Press Program Entry Switch again. | PROG |
| ☛ “PROG” will stop blinking. This means that you have completed | 2 |
PROG | programming. |
|
| Three seconds later, the display window will go blank when the door is |
|
| closed. |
|
1
2
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
|
|
|
Open the door and leave it open.
☛ The oven lamp will turn on and “0” will appear.
| While pressing Stop/Reset pad, press Start pad. | A |
|
| PROG |
+ | ☛ All currently programmed information (the program set into each | 1 |
| ||
| Memory pad (A/B sides), Beep Tone, and Program Lock information) |
|
| will continuously appear. | PROG |
|
| B |
|
| 1 |
2
G. CYCLE COUNTER◆To Read Total Cumulative Times That The Oven Has Been Used:
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 | Open the door and leave it open. |
|
☛ The oven lamp will turn on and “0” will appear.
2 |
|
| Close the door. |
|
|
| ☛ Carry out Step 3 within 60 seconds of closing the door, or the display |
|
|
| will go blank. |
|
|
|
|
3 |
| + | While pressing Buzzer Switch, press Program Entry Switch. |
|
| ☛ The display shows the total cumulative number of times the oven has | |
| BUZZ | PROG | been used. |
- 16 -