Panasonic NE1757R, NE2157R, NE1258R, NE1257R G. Program List, H. Cycle Counter, How to Operate

How to Operate

For selecting length of tone “short beeps for 60 seconds”:

Example:  To select short beeps for 60 seconds

5

6

PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW
	Follow step 1-4 on page 12. DO NOT CLOSE THE DOOR!	PROG
		1
0	Within three seconds after pressing Prog pad at step 4, press
	Number/Memory pad “0” once.	PROG
	\“PROG” will start to blink and 2nd Stage Heating Indicator “2” (the	2
	length of beep tone “short beeps for 60 seconds”) will be indicated.
PROG	Press Prog pad.	PROG
	\“PROG” will stop blinking. This means that you have completed
		2
	programming.
	Three seconds later, “0” will appear.

• Close the door. Digital Display Window will go blank.

G. PROGRAM LIST

	PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW
1		Open the door and leave it open.
		\The oven lamp will turn on and “0” will appear.
2 STOP/		While pressing Stop/Reset pad, press Start pad.	e.g.
RESET	START	\All currently programmed information (the program set into each	PROG
		Number/Memory pad (A/B sides), Beep Tone, and Program Lock	1
		information) will continuously appear.
			HI
			PROG
			1
			MED
			PROG
			2
			MED
			PROG

H. CYCLE COUNTER

XXTo Check The Number Of Cycles That The Oven Has Been Used In Manual Mode:

	PAD		INSTRUCTION	DIGITAL DISPLAY WINDOW
1			Open the door and leave it open.
			\The oven lamp will turn on and “0” will appear.
2	STOP/	POWER/	While pressing Stop/Reset pad, press Power Level Selector pad.	e.g.
	RESET	LEVEL	\The number of cycles that the oven has been used in manual mode will
			appear.

- 13 -