How to Operate
B. PROGRAMMED HEATING
XXIn Program Unlock Mode:
Example: To select Number/Memory pad “3” at A side in which your desired heating program (at HIGH power for 3 min., single stage heating) is set
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 |
| Open the door and put the food in the oven. |
|
|
| \The oven lamp will turn on and “0” will appear. |
|
|
| Note: While “0” appears, operation is available. One minute after the door |
|
|
| is closed, “0” will disappear. |
|
2 | 3 | Press the desired Number/Memory pad “3”. | PROG |
| |||
| \The currently programmed information will be indicated. | 1 | |
|
|
| |
|
|
| HI |
3 |
| Press Start pad. | PROG |
| START | \The oven lamp will turn on and heating will start. The heating time will | 1 |
|
| count down. | |
|
| HI |
• When all time expires, beep tone will sound and heating will stop. The oven lamp will turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on.
•Close the door. The oven lamp will turn off. One minute later, Digital Display Window will go blank.
Note:
•When you want to select the number at B side, press Shift (A/B) pad before pressing the desired
Number/Memory pad.
XXIn Program Lock Mode:
Just press the desired Number/Memory pad. Heating will automatically start without pressing Start pad.
For Double (or Triple) Quantity heating:
Press Double (or Triple) Quantity pad before pressing the desired Number/Memory pad.
C. PROGRAMMING NUMBER/MEMORY PADS
The oven can not be programmed when Program Lock is activated! (see page
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”
1
2
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
| Keep the door closed. |
|
| \Digital Display Window must be blank. |
|
PROG | Press Program pad. | PROG |
\“PROG” will start to blink. |
| |
|
| |
|
|
|
- 9 -
