Panasonic NV-FJ710 Series VCR Operation, Numeric buttons, To Activate the Child Lock Function

VCR Operation

When you want to operate the VCR, set the VCR/TV switch

Pto “VCR”.

°2 Numeric buttons

To select the programme positions (1–99) of the VCR.

Example:

9:9

°Q Infra-red transmitter

°V Child Lock Function buttons

(Convenient function to prevent unauthorized use)

This function deactivates all buttons on the VCR and the remote control. Use this function, when you do not want other people to operate the VCR.

To Activate the Child Lock Function:

19:		1	9		1 Hold down the OK and the OFF (i) buttons V
					simultaneously until the “!" hold” indication appears
To select the satellite programme positions					in the VCR display.
Example:					≥ If you press a button while the Child Lock function is
					on, the “!" hold” indication appears in the VCR
	SAT	SAT
SAT 9:					display to inform you that no operation is possible.
	0	0	9
	SAT				To Cancel the Child Lock Function:
SAT19:	0	1	9		1 Hold down the OK and the OFF (i) buttons V
	SAT				simultaneously until the “!" hold” indication
SAT129:	0	1	2	9
					disappears.
≥ 3-digit programme positions can be selected with this					≥ If you disconnect the power cable, the Child Lock
					function is automatically cancelled after the power
remote control only in case of a satellite receiver that is
					backup time of approximately 60 minutes has
marked with (°1) on the enclosed list of compatible
					elapsed.
satellite receivers.
					≥ If you cannot cancel the Child Lock function, press
To enter a ShowView number.					the EXIT button S and perform the operation step 1.

To enter numbers for various settings.

°\ Cassette compartment

°A VCR 1/2 switch

°` Infra-red Remote Control Receiver window

Set to the “VCR 2” position when using two Panasonic

VCRs. (See page 51.)

°O SUBTITLE button

°b VCR display

When receiving or playing back recordings of TV programmes that are broadcast with subtitles via Teletext, and also when playing back pre-recorded cassettes with “Closed Caption” subtitles, you can make the subtitles appear or disappear on the TV screen by pressing this button.

≥Every time you press this button, the “<:ON” indication or “<:OFF” indication appears on the TV screen for a few seconds. When you press this button to display the “<:ON” indication, the subtitles are displayed on the TV screen.

≥After pressing this button so that the “<:ON” indication appears, it may take a few moments until the subtitles are displayed on the TV screen.

≥Pressing this button also changes the setting of “Subtitles” for “Display” on the Main menu accordingly. Therefore, turning the subtitle function on or off is also possible by changing the above setting on the Main menu. (See page 49.)

4