1
TAPE CARD
MPEG4
ªRecording the Moving Pictures (MPEG4)
You can record moving pictures for
1 | Slide the [TAPE/CARD] Selector to [CARD]. |
2 | Slide the [PICTURE/MPEG4/VOICE] Selector to [MPEG4]. |
3 | Press the [PHOTO SHOT] Button. |
PICTURE VOICE
2
CARD MODE
123 TAPE CARD
MPEG4
PICTURE VOICE
CARD MODE
3PHOTO SHOT
≥During recording the [MPEG4] indication appears and is lit in red. |
Recording is not possible while the indication is lit in green ≥The shutter speed is adjusted within the range of 1/30 to 1/500 while
recording moving pictures (MPEG4).
≥The picture size of the moving picture (MPEG4) is set to be [176k144].
≥If the [TAPE/CARD] selector is set to [CARD], the Movie Camera is automatically turned off when you leave it for about 5 minutes without
performing any photoshot recording. ≥The following functions are disabled.
≥Digital zooming (l20) ≥Cinema function (l21) ≥Digital functions (l25) ≥Title functions (l42)
≥For other notes concerning this item, see page 49
ªRecording Voice (SD Voice Recording)
You can record voice data on a card.
1Slide the [TAPE/CARD] Selector to [CARD].
2Slide the [PICTURE/MPEG4/VOICE] Selector to [VOICE].
3Press the [PHOTO SHOT] Button.
4Voice from
≥Voice from external microphone connected to the microphone input jack can also be recorded.
≥During recording the [VOICE] indication appears and is lit in red.
Recording is not possible while the indication is lit in green.
≥If nothing is recorded for approximately 5 minutes, the Movie Camera is turned off automatically.
≥For other notes concerning this item, see page 50.
37