≥When you set [EFFECT1] of [DIGITAL EFFECT] Sub- Menu on the [CAMERA FUNCTIONS] Main-Menu to [GAIN-UP[ or [EFFECT2] to [SEPIA] or to [MONO].
≥When you set the Zoom to 10k or higher ≥During Digital Still Picture Mode ≥When you display a Menu
In the following cases, the [1] Indication flashes: ≥The flashing indicates thst the prviously adjusted White
Balance setting is still kept. This setting will be kept until White Balance is adjusted again.
≥You may not be able to achieve correct White Balance adjustment manually under weak illumination.
ªManual Shutter Speed Adjustment
≥You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject.
≥During normal playback, movement in the images may not look smooth.
≥Because the colour and brightness of the playback image may become unstable, avoid recording under fluorescent light, mercury light, or sodium light.
≥If you are using either Gain-up Mode (l25) or Programme AE Mode (l21), you cannot adjust the shutter speed. If the shutter speed was adjusted manually, this setting will be cancelled.
ªVideo Flash
≥Even when the Video Flash is closed, it automatically determines if flash is needed by sensing the surrounding luminosity. (If flash is needed, either [ß],[ßi] or [ßj] Indication flashes.)
≥Either [ß],[ßi] or [ßj] Indication is flashing when the Video Flash is charging. When it is displayed, the flash can
be set off.
≥When P-IN-P is displayed or titles is created, flash is also set off.
≥Continuous Photoshot is not possible if the Video Flash is used.
≥If the Digital Still Picture Mode is used when the [FLASH] on the [RECORDING SETUP] Sub-Menu to [AUTO] or
[ON], the flash will be set off.
≥When the [FLASH] on the [RECORDING SETUP] Sub- Menu to [AUTO] and the Movie Camera’s iris is adjusted, the [ß] Indication may disappear and the Video Flash may not be set off.
≥The shutter speed and iris value are fixed when the Video Flash is used.
≥Using the Video Flash outdoors or with backlight or other bright conditions may result in white blotches (colour blotches) on the pictures.
≥Under backlight conditions, either adjust the iris manually or use the Backlight Compensation Function.
≥When using Video DC Light VZ-LDDS9 (optinal) attached to the hot shoe, close the Video Flash to avoid contact with Video DC Light.
ªManual Iris Adjustment
≥Depending on zoom magnification, there are iris values that will not be displayed.
≥If you are using Programme AE Mode (l21), you cannot adjust the iris. If the iris is adjusted manually, this setting will be cancelled.
≥If you attempt to adjust the Shutter Speed after setting the Iris, the value set for the Iris will be cancelled.
ªDigital Effect Functions
It is as follows when [GAINUP] is selected.
≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated.
≥The Sports Mode [5], the Portrait Mode [7] and Low Light Mode [4] are cancelled.
≥It is not possible to use [WIPE], [MIX] or [TRACER] of [EFFECT1] together with the digital modes of [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing
the selected White Balance Mode is not possible. (l22) ≥When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is set to [ON], the digital modes of [EFFECT1] on the [DIGITAL EFFECT] Sub-Menu cannot be used. (l47)
In the following cases, using the [EFFECT1] on the [Digital EFFECT Sub-Menu is not possible.
≥When [PROGRESSIVE] is set to [ON] ≥Card Mode
In the following cases, using the Digital Effect Function is not possible.
≥Card Mode
Wipe Mode and Mix Mode
If either one of the following operations is carried out, stored images will be erased, and Wipe and Mix Functions cannot be used.
≥Use the Camera Search Function ≥Press the [STILL] Button
Picture-in-Picture
≥If the Movie Camera is turned off, the smaller picture disappears.
≥Titles cannot be inserted into the smaller picture.
Multi-Picture Mode
≥If the [MULTI] Button is pressed while self-recording Mirror mode (l25) is used, the still picture is displayed from the upper right corner of the screen, but, in reality, the picture is recorded from the upper left corner as usual.
≥Multi Picture mode cannot be used in digital still picture
mode.
≥The quality of Multi images deteriorates slightly.
≥If there is input from DV Terminal, a multi screen cannot be created.
≥The Multi-Mode Menu setting is interlocked with both playback and recording mode, however, when recording mode is selected after the Multi Picture Mode for playback is set to [PHOTO] or [SCENE], the setting for Multi Picture Mode changes to [STROBE].
≥When signals are input from S-Video Input/Output Socket or Audio-Video Input/Output Socket, a Multi Screen cannot be re-displayed.
≥Signals input from S-Video Input/Output Socket or Audio- Video Input/Output Socket cannot be displayed on a Multi Screen.
ªPlaying Back
Repeat Playback
If you continue to press the [1] Button for 5 seconds or longer, the Movie Camera switches to Repeat Playback Mode, and the [R !] Indication appears. (To cancel Repeat Playback Mode, set the [OFF/ON] Switch to [OFF].)
Listening to Playback Sound through Headphones
When you wish to listen to playback sound through headphones, connect the headphones to the [PHONES] Socket (l48) on the Movie Camera. In this case, no sound (including a warning sound and shutter sound) will not be reproduced through the built-in speaker of the Movie Camera.
Choosing Sound during Playback
You can select the sound by using the [AUDIO OUT] setting on the [PLAYBACK FUNCTIONS] Sub-Menu.
