1 |
|
|
|
|
|
| < |
|
|
2 |
| EJECT | 4 |
|
6 |
|
|
| 3 |
|
|
|
| |
|
| 5 |
|
|
LOCK |
|
|
|
|
3OPEN | 3 | 2 | 1 | 4 |
|
|
| ||
|
| ENGLISH |
|
|
L |
| Inserting/Ejecting the Cassette | ||
1 | l NUOM |
2 | 1 |
3 | x3lmbkz |
| VM ! ksJswVLswNM |
| ≥ |
4 | x< bgb`qz ! |
5 | 2 |
6 | xil`hz |
≥ |
|
≥ | xYz |
∫ |
|
≥ |
|
≥
3
≥4
1 Connect the AC Adaptor or attach a charged Battery. (l 18, 20)
2
3 Slide the [3OPEN] Lever to the left and simultaneously open the LCD Monitor in the direction of the arrow approximately 90x.
≥Be sure to keep the LCD Monitor in its vertical position, so that the Cassette Compartment Cover, when it opens, does not hit the LCD Monitor.
4 Press the [< EJECT] Button.
5 Insert the cassette with the cassette window 2 facing outward and push it all the way in.
6 Close the Cassette Compartment by pressing the [LOCK] Button.
≥If the AC Adaptor or Battery is used to supply power, it is possible to insert or eject the cassette without turning on the Movie Camera.
≥If a cassette with broken out erasure prevention tab is inserted, the [Y] Indication flashes.
∫Preventing Accidental Erasure of Recordings
≥Recording on a previously recorded cassette erases the existing scenes and sound.
≥To protect important recordings against accidental erasure, use a screwdriver to break out the tab 3 on the cassette (some cassettes have
≥To be able to record again on a protected cassette, firmly
cover the hole where the tab was with two layers of adhesive tape 4.
