Panasonic NV-VZ10A Using the Tape Counter Indication, Checking the Elapsed Tape Time, 116

2		1	0:09.22	0:00.00
DISPLAY SETUP
TAPE	30
DISPLAY	ALL
C.RESET	----	YES
SELF SHOOT	NOR.
RETURN	----
PRESS MENU TO EXIT
3
DISPLAY SETUP
TAPE	30			MENU
DISPLAY	ALL
C.RESET	----	YES	1, 3
				MF/
				TRACKING
RETURN	----		2, 4
PRESS MENU TO EXIT
				FOCUS / SET
				ENGLISH
	$%#		Using the Tape Counter Indication

￿￿The Tape Counter Indication is convenient for the following

￿l ￿2 purposes: to check the Elapsed Tape Time (described =NOM ￿

below), and to use the Memory Stop Function (l120).

!"#$ xM￿MMKMMz1￿

	xafpmi^v=pbqrmz￿					￿l=OU￿
1	￿￿x34z			xafpmi^vz !"#$		￿
2	x	z	!	x	z
	￿ pbq				^ii ! ￿
3	￿￿x34z			x`Kobpbqz !"#$		￿
4	￿xpbqz			xvbpz	￿
	≥
	≥				xM￿MMKMMz
				x￿z￿

≥

xM￿MMKMMz￿

2￿

3￿

Checking the Elapsed Tape Time

The Tape Counter Indication shows the elapsed tape time both during recording or playback.

You can freely reset this indication (return the counter to [0:00.00] 1). Therefore, by resetting the counter to zero when you start recording or playback, you can check the tape time that has elapsed from that point.

After displaying the [DISPLAY SETUP] Sub-Menu... (l28)

1 Turn the [34] Dial to select [DISPLAY].

2 Press the [SET] Button to select [ALL].

3 Turn the [34] Dial to select [C.RESET].

4 Press the [SET] Button to select [YES].

≥When recording or playback starts, the elapsed tape time is indicated in hours, minutes and seconds. During playback of parts of the tape on which no recording has been made, this indication does not change.

≥If you rewind the tape further than the tape counter position [0:00.00], the minus sign [j] appears in front of the Tape Counter Indication.

≥The Tape Counter Indication is automatically reset to [0:00.00] when you take out the cassette, remove the Battery or use the High-Speed Rewinding Function.

2: Camera Mode

3: VCR Mode

-116-