Lexmark 40G0110, 40G0350, 40G0150, 40G0440 Smtp Setup menu, Understanding the printer menus 222

Understanding the printer menus 222

Use

Parity

Even

Odd

None

Ignore

Honor DSR

On

Off

To

Set the parity for serial input and output data frames.

Note: None is the factory default setting.

Determine whether the printer uses the DSR Signal.

Notes:

•Off is the factory default setting.

•DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Use	To
Primary SMTP Gateway	Specify SMTP server gateway and port information.
	Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout	Specify the amount of time in seconds before the server stops trying to
5–30	send an e‑mail.
	Note: 30 is the factory default setting.
Reply Address	Specify a reply address of up to 128 characters in the e-mail sent by the
	printer.
Use SSL	Set the printer to use SSL for increased security when connecting to the
Disabled	SMTP server.
Negotiate	Notes:
Required	• Disabled is the factory default setting.
	• When the Negotiate setting is used, the SMTP server determines if
	SSL will be used.
SMTP Server Authentication	Specify the type of user authentication required for printing privileges.
No authentication required	Note: “No authentication required” is the factory default setting.
Login/Plain
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5