Lexmark MS810, 40G0350 Solving printer problems, Unsupported disk, Unsupported option in slot x

Troubleshooting 309

Unsupported disk

1Remove the unsupported disk, and then install a supported one.

2Select Continue to clear the message and continue printing. For non‑touch screen printer models, press to confirm.

Unsupported option in slot [x] [55]

1Turn off the printer.

2Unplug the power cord from the wall outlet.

3Remove the unsupported option card from the printer controller board, and then replace it with a supported card.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

USB port [x] disabled [56]

Try one or more of the following:

•Select Continue to clear the message. For non-touch-screen printer models, press to confirm. The printer discards any data received through the specified serial port.

•Select Reset active bin to reset the active bin for a linked set of bins.

•Make sure the USB Buffer menu is enabled.

Solving printer problems

•“Printer does not respond” on page 310

•“Printing problems” on page 312

•“Hardware and internal option problems” on page 319

•“Paper feed problems” on page 323

•“Print quality problems” on page 325