Lexmark 40G0410, MS810 Flash Drive Menu, Print Settings menu, Understanding the printer menus 238

Understanding the printer menus		238
	Use		To
	Export Configuration Package		Export the printer configuration package to a flash drive.
	Export		Note: The configuration package cannot be exported unless a
			flash drive is attached to the printer.
Flash Drive Menu
Print Settings menu
	Use	To
	Copies	Specify a default number of copies for each print job.
	1–999	Note: 1 is the factory default setting.
	Paper Source	Set a default paper source for all print jobs.
	Tray [x]	Note: Tray 1 is the factory default setting.
	MP Feeder
	Manual Paper
	Manual Envelope
	Collate	Stack the pages of a print job in sequence when printing multiple copies.
	(1,1,1) (2,2,2)	Note: “(1,1,1) (2,2,2)” is the factory default setting.
	(1,2,3) (1,2,3)
	Sides (Duplex)	Specify whether prints are on one side or on both sides of the page.
	1 sided	Note: 1 sided is the factory default setting.
	2 sided
	Staple	Specify whether prints are stapled.
	Off	Notes:
	On
		• Off is the factory default setting.
		• On allows the printer to staple print jobs.
		• This menu appears only when a supported staple finisher is installed.
	Hole Punch	Specify whether prints have holes for binding.
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu appears only when a supported staple, hole punch finisher is
		installed.
	Hole Punch Mode	Specify the number of holes to be made on the prints.
	2 holes	Notes:
	3 holes
		• “3 holes” is the factory default setting.
	4 holes
		• This menu appears only when a supported staple, hole punch finisher is
		installed.