Lexmark 40G0110, 40G0350, 40G0150 manual Adjusting the brightness of the display, Using MS810de 131

Using MS810de 131

Using Hibernate Mode

Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely.

Note: The Hibernate and Sleep modes can be scheduled.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Sleep Button Settings.

3From the Press Sleep Button or Press and Hold Sleep Button drop‑down menu, select Hibernate.

4Click Submit.

Using the printer control panel

1From the home screen, navigate to:

> Settings > General Settings

2Touch Press Sleep Button or Press and Hold Sleep Button.

3Touch Hibernate > .

Adjusting the brightness of the display

To save energy, or if you are have trouble reading your display, adjust the brightness of the display. Available settings range from 20–100. The factory default setting is 100.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings.

3In the Screen Brightness field, enter the brightness percentage you want for the display.

4Click Submit.