Using MS810n, MS810dn, MS811n, MS811dn, MS812dn

53

4Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

5Load the paper stack with the printable side facedown.

Note: Make sure the paper or envelope is loaded properly.

There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher

With an optional staple finisher

ABC

 

Onesided printing

Onesided printing

ABC

ABC

 

Twosided printing

Twosided printing

If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

Onesided printing

Twosided printing

 

ABC

Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.

Page 53
Image 53
Lexmark 40G0110, 40G0350, 40G0150, 40G0440, 40G0410, 40G0210, MS810DE, MS811DTN, MS811DN One ‑sided printing Two ‑sided printing