Lexmark MS810DN, 40G0350, 40G0110 Using the printer control panel, Display View the printer status

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 48

When using optional trays:

•Always use a caster base when the printer is configured with a 2100‑sheet tray.

•The 2100‑sheet tray must always be at the bottom of a configuration.

•A maximum of four optional trays may be configured with the printer.

•The optional 250‑ and 550‑sheet trays may be installed in any order.

Using the printer control panel

1 2 3 4 5

6

10		9	8	7
	Use the	To
1 Display		• View the printer status.

•Set up and operate the printer.

2	Select button	Submit changes made in the printer settings.
3	Arrow buttons	Scroll up and down or left and right.
4	Keypad	Enter numbers, letters, or symbols.
5	Sleep button	Enable Sleep mode or Hibernate mode.
		Do the following to wake the printer from Sleep mode:
		• Press any hard button.
		• Pull out Tray 1 or load paper in the multipurpose feeder.
		• Open a door or cover.
		• Send a print job from the computer.
		• Perform a power‑on reset with the main power switch.
		• Attach a device to the USB port on the printer.

6Stop or Cancel button Stop all printer activity.

7	Back button	Return to the previous screen.
8	Home button	Go to the home screen.
9	Indicator light	Check the status of the printer.
10	USB port	Connect a flash drive to the printer.
		Note: Only the front USB port supports flash drives.