Lexmark MS810DN, 40G0350 manual Understanding the printer menus 243, Separator Source, Staple Job

Understanding the printer menus		243
	Use	To
	Separator Source	Specify the paper source for separator sheets.
	Tray [x]	Notes:
	Manual Feeder
		• Tray 1 (standard tray) is the factory default setting.
		• From the Paper menu, set Configure MP to "Cassette" for Manual Feeder to
		appear as a menu setting.
	Paper Saver	Print multiple‑page images on one side of a paper.
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up
	Paper Saver Ordering	Specify the positioning of multiple‑page images when using Paper Saver.
	Horizontal	Notes:
	Reverse Horizontal
		• Horizontal is the factory default setting.
	Reverse Vertical
		• Positioning depends on the number of page images and whether they are in
	Vertical
		portrait or landscape orientation.
	Paper Saver Orientation	Specify the orientation of a multiple‑page document.
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and
	Landscape	landscape.
	Portrait
	Paper Saver Border	Print a border when using Paper Saver.
	None	Note: None is the factory default setting.
	Solid
	Staple Job	Specify whether printed output is stapled.
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu appears only when a supported staple finisher is installed.
	Run Stapler Test	Print a report that confirms that the staple finisher is functioning properly.
		Note: This menu appears only when a supported staple finisher is installed.
	Hole Punch	Specify whether holes will be created on printed outputs for the purpose of collecting
	On	the sheets in a binder or folder.
	Off	Notes:
		• Off is the factory default setting.
		• This menu appears only when a supported staple, hole punch finisher is
		installed.