Lexmark MS811DTN, 40G0350 Replace unsupported cartridge 32.xy, Replace unsupported fuser 32.xy

Troubleshooting 306

Replace maintenance kit, 0 estimated pages remain [80.xy]

Contact customer support at http://support.lexmark.com or your service representative, and then report the message. The printer is scheduled for maintenance.

Replace roller kit [81.xx]

1Replace the roller kit. For more information, see the instruction sheet that came with the part.

2Press to clear the message and continue printing.

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com.

Replace unsupported fuser [32.xy]

Remove the fuser, and then install a supported one. For more information, see the instruction sheet that came with the part.

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Note: If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com.

Restore held jobs?

Try one or more of the following:

•Select Restore on the printer control panel to restore all held jobs stored in the printer hard disk. For

non‑touch‑screen printer models, press to confirm.

•Select Do not restore if you do not want any print jobs to be restored. For non‑touch‑screen printer models, press

to confirm.