Lexmark 40G0410, 40G0350, 40G0110 Network Card menu, Understanding the printer menus 212, UseTo

Understanding the printer menus	212
Use	To
Standard Network Setup OR	Show and set the printer network settings.
Network [x] Setup	Note: The Wireless menu appears only when the printer is connected to a wireless
Reports
	network.
Network Card
TCP/IP
IPv6
Wireless
AppleTalk

Reports menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > Reports

•Network/Ports > Network [x] > Network [x] Setup > Reports

UseTo

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > Network Card

•Network/Ports > Network [x] > Network [x] Setup > Network Card

Use	To
View Card Status	View the connection status of the wireless network adapter.
Connected
Disconnected
View Card Speed	View the speed of an active wireless network adapter.
Network Address	View the network addresses.
UAA
LAA
Job Timeout	Set the amount of time it takes for a network print job to be canceled.
0, 10–225 seconds	Notes:
	• “90 seconds” is the factory default setting.
	• A setting value of 0 disables the timeout.
	• If a value between 1 and 9 is selected, then Invalid appears on the
	display, and the value is not saved.
Banner Page	Allow the printer to print a banner page.
Off	Note: Off is the factory default setting.
On