Lexmark MS812DE, 40G0350, 40G0110, 40G0150, 40G0440 manual Loading the 250‑ or 550‑sheet tray, Measure

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 50

Notes:

•The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one‑sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two‑sided (duplex) printing.

•The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one‑sided and two‑sided printing.

•When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.

•If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

From the printer control panel, navigate to:

> Settings > > Paper Menu > > Universal Setup > > Units of Measure > > select unit of

measure >

Loading the 250‑ or 550‑sheet tray

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.

1Pull out the tray.

Notes:

•When loading folio‑, legal‑, or Oficio‑size paper, lift the tray slightly and pull it out completely.

•Avoid removing trays while a job prints or while Busy appears on the display. Doing so may cause a jam.