Lexmark MS811DTN manual Moving the printer, Emptying the hole punch box, Before moving the printer

Maintaining the printer 267

4Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.

Warning—Potential Damage: Do not use household cleaners or detergents to prevent damage to the exterior of the printer.

5Make sure all areas of the printer are dry before sending a new print job.

Emptying the hole punch box

1Pull out the hole punch box.

2Empty the container.

3Insert the emptied hole punch box back into the finisher until it clicks into place.

Moving the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

Before moving the printer

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:

•Turn off the printer, and then unplug the power cord from the electrical outlet.

•Disconnect all cords and cables from the printer.

•If two or more optional finishers are installed, then remove the finishers individually from the printer.

Notes:

–Make sure to remove the topmost finisher first.