Lexmark 40G0210, 40G0350, 40G0110, 40G0150, 40G0440, 40G0410, MS810DE, MS811DTN, MS811DN, MS810DN, MS812DE

Additional printer setup 18

4Remove the metal cover from the ISP opening. a Loosen the screw.

bLift the metal cover, and then pull it out completely.

1 2

3

5Align the posts of the plastic bracket with the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place.

Note: Make sure that the plastic bracket has latched completely, and that the plastic bracket is seated firmly on the controller board cage.