Lexmark MS810DTN, 40G0350, 40G0110, 40G0150, 40G0440, 40G0410 One ‑sided printing Two ‑sided printing

Using MS810de 116

5Load the paper or specialty media.

Note: Slide the stack gently into the multipurpose feeder until it comes to a stop.

•Load only one size and type of paper or specialty media at a time.

•Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.

•There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher	With an optional staple finisher
ABC	ABC
One‑sided printing	One‑sided printing
ABC
Two‑sided printing	Two‑sided printing

•If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

One‑sided printing	Two‑sided printing
ABC

Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.