Lexmark MS810DE, 40G0350, 40G0110, 40G0150, 40G0440, 40G0410, 40G0210, MS811DTN Verifying printer setup

Additional printer setup 45

In Windows 8

From the Search charm, type run and then navigate to:

Apps list > Run > type devmgmt.msc > OK

In Windows 7 or earlier

1Click or click Start, and then click Run.

2In the Start Search or Run dialog, type devmgmt.msc.

3Press Enter or click OK.

bDouble‑click Ports (COM & LPT) to expand the list of available ports.

cDo either of the following:

•Press and hold the COM port where you attached the serial cable to your computer (example: COM1).

•Right‑click the COM port where you attached the serial cable to your computer (example: COM1).

dFrom the menu that appears, select Properties.

eOn the Port Settings tab, set the serial parameters to the same serial parameters set in the printer. Check the serial heading of the menu settings page for the printer settings.

fClick OK, and then close all the dialogs.

gPrint a test page to verify printer installation.

Verifying printer setup

When all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:

•Menu settings page—Use this page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option, and then install it again.

For more information, see the following:

–“Printing a menu settings page” on page 78 for non‑touch‑screen printer models

–“Printing a menu settings page” on page 128 or “Printing a menu settings page” on page 177 for touch‑screen printer models

•Network setup page—Use this page to verify the network connection. This page also provides important information that aids network printing configuration.

Note: Make sure your printer has Ethernet or wireless capability and is attached to a network.

For more information, see the following:

–“Printing a network setup page” on page 79 for non‑touch‑screen printer models

–“Printing a network setup page” on page 128 or “Printing a network setup page” on page 178 for touch‑screen printer models