Lexmark MS810DTN, 40G0350, 40G0110, 40G0150, 40G0440, 40G0410, 40G0210 Using the printer control panel

Using MS810de 90

•When using optional trays:

–Always use a caster base when the printer is configured with a 2100‑sheet tray.

–The 2100‑sheet tray must always be at the bottom of a configuration.

–A maximum of four optional trays may be configured with the printer.

–The optional 250‑ and 550‑sheet trays may be installed in any order.

Using the printer control panel

1 2 3 4

	7	6	5
	Use the	To
1	Display	• View the printer status.

•Set up and operate the printer.

2	Home button	Go to the home screen.
3	Sleep button	Enable Sleep mode or Hibernate mode.
		Do the following to wake the printer from Sleep Mode:
		• Press any hard button.
		• Pull out Tray 1 or load paper in the multipurpose feeder.
		• Open a door or cover.
		• Send a print job from the computer.
		• Perform a power‑on reset with the main power switch.
		• Attach a device to the USB port on the printer.
4	Keypad	Enter numbers, letters, or symbols.

5Stop or Cancel button Stop all printer activity.

6	Indicator light	Check the status of the printer.
7	USB port	Connect a flash drive to the printer.
		Note: Only the front USB port supports flash drives.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.