Lexmark MS810, 40G0350, 40G0110, 40G0150, 40G0440 Quality menu, Understanding the printer menus 244

Understanding the printer menus		244
	Use		To
	Hole Punch Mode		Specify the number of holes to be created on printed outputs for the purpose of
	2 holes		collecting the sheets in a binder or folder.
	3 holes		Notes:
	4 holes		• “3 holes” is the US factory default setting. “4 holes” is the international factory
			default setting.
			• This menu appears only when a supported staple, hole punch finisher is
			installed.
	Offset Pages		Offset pages at certain instances.
	None		Notes:
	Between Copies
			• None is the factory default setting.
	Between Jobs
			• Between Copies offsets each copy of a print job if Collate is set to On. If Collate
			is set to Off, then each set of printed pages are offset, such as all page 1's and
			all page 2's.
			• Between Jobs sets the same offset position for the entire print job regardless
			of the number of copies printed.
			• This menu appears only when a supported staple finisher is installed.
Quality menu
	Use	To
	Print Resolution	Specify the printed output resolution in dots per inch.
	300 dpi	Note: 600 dpi is the factory default setting.
	600 dpi
	1200 dpi
	1200 Image Q
	2400 Image Q
	Pixel Boost	Enable more pixels to print in clusters for clarity, in order to enhance images horizontally
	Off	or vertically, or to enhance fonts.
	Fonts	Note: Off is the factory default setting.
	Horizontally
	Vertically
	Both directions
	Isolated
	Toner Darkness	Lighten or darken the printed output.
	1–10	Notes:
			• 8 is the factory default setting.
			• Selecting a smaller number can help conserve toner.