Additional printer setup

16

An optional memory card can be purchased separately and attached to the controller board.

1Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2Unpack the memory card.

Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may cause damage.

3Align the notch (1) on the memory card with the ridge (2) on the connector.

1

2

4Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place.

5Reattach the controller board shield, and then the controller board access cover.

Page 16
Image 16
Lexmark 40G0440, 40G0350, 40G0110, 40G0150, 40G0410, 40G0210, MS810DE, MS811DTN, MS811DN, MS810DN, MS812DE, MS810DTN manual