Lexmark 40G0440, 40G0350 Not enough free space in flash memory for resources, Ppds font error

Troubleshooting 302

Not enough free space in flash memory for resources [52]

Try one or more of the following:

•From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen

printer models, press to confirm.

•Delete fonts, macros, and other data stored in the flash memory.

•Upgrade to a larger capacity flash memory card.

Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.

PPDS font error [50]

Try one or more of the following:

•From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen

printer models, press to confirm.

•If the printer cannot find the requested font, then from the printer control panel, navigate to: PPDS menu > Best Fit > On

The printer will find a similar font and reformat the affected text.

•Cancel the current print job.

Paper changes needed

Try one or more of the following:

•Select Use current supplies on the printer control panel to clear the message and continue printing.

For non-touch-screen printer models, press to confirm.

•Cancel the current print job.

Parallel port [x] disabled [56]

Try one or more of the following:

•Select Continue to clear the message. For non-touch-screen printer models, press to confirm. The printer discards any data received through the parallel port.

•Select Reset active bin to reset the bin for a linked set of bins.

Reattach bin [x]

Try one or more of the following:

•Turn off the printer, and then turn it back on.

•Reattach the specified bin.

1Turn off the printer.

2Unplug the power cord from the electrical outlet.