Lexmark 40G0440, 40G0350, 40G0110 Miscellaneous Security Settings menu, Confidential Print menu

Understanding the printer menus	224
Use	To
Edit Access Controls	Control access to printer menus, firmware updates, held jobs, and other access
Administrative Menus	points.
Function Access
Management
Solutions
Cancel jobs at the Device

Miscellaneous Security Settings menu

Note: This menu appears only in touch‑screen printer models.

Use	To
Login Restrictions	Limit the number and time frames of failed login attempts from the printer control
Login failures	panel before all users are locked out.
Failure time frame	Notes:
Lockout time	• “Login failures” specifies the number of failed login attempts before users are
Panel Login Timeout
	locked out. Settings range from 1 to 10. 3 attempts is the factory default
Remote Login Timeout
	setting.
	• “Failure time frame” specifies the time frame during which failed login
	attempts can be made before users are locked out. Settings range from 1 to 60
	minutes. 5 minutes is the factory default setting.
	• “Lockout time” specifies how long users are locked out after exceeding the
	login failures limit. Settings range from 1 to 60 minutes. 5 minutes is the
	factory default setting.
	• Panel Login Timeout specifies how long the printer remains idle on the printer
	control panel before automatically logging the user off. Settings range from 1
	to 900 seconds. 30 seconds is the factory default setting.
	• Remote Login Timeout specifies how long a remote interface remains idle
	before automatically logging the user off. Settings range from 1 to 120
	seconds. 10 minutes is the factory default setting.
Minimum PIN Length	Limit the digit length of the PIN.
1–16	Note: 4 is the factory default setting.

Confidential Print menu

Use	To
Max Invalid PIN	Limit the number of times an invalid PIN can be entered.
Off	Notes:
2–10
	• This menu appears only when a formatted, non-defective printer hard disk is installed.
	• Once the limit is reached, the print jobs for that user name and PIN are deleted.

Note: Off is the factory default setting.