Lexmark MS812DE, 40G0350, 40G0110, 40G0150 Job Accounting menu, Understanding the printer menus 245

Understanding the printer menus		245
	Use	To
	Enhance Fine Lines	Enable a print mode preferable for files such as architectural drawings, maps, electrical
	On	circuit diagrams, and flow charts.
	Off	Notes:
		• Off is the factory default setting.
		• You can set this option from the printer software. For Windows users, click File >
		Print, and then click Properties, Preferences, Options, or Setup. For Macintosh
		users, choose File > Print, and then adjust the settings from the Print dialog and
		pop‑up menus.
		• To set this option using the Embedded Web Server, type the network printer IP
		address in the Web browser address field.
	Gray Correction	Automatically adjust the contrast enhancement applied to images.
	Auto	Note: Auto is the factory default setting.
	Off
	Brightness	Adjust the printed output either by lightening or darkening it. You can conserve toner
	‑6 to 6	by lightening the output.
		Note: 0 is the factory default setting.
	Contrast	Adjust the contrast of printed objects.
	0–5	Note: 0 is the factory default setting.

Job Accounting menu

Note: This menu item appears only when a formatted, non-defective printer hard disk is installed. Make sure the printer hard disk is not read/write‑ or write‑protected.

Use	To
Job Accounting Log	Determine and set if the printer creates a log of the print jobs it receives.
Off	Note: Off is the factory default setting.
On
Job Accounting Utilities	Print and delete log files or export them to a flash drive.
Accounting Log Frequency	Determine and set how often a log file is created.
Weekly	Note: Monthly is the factory default setting.
Monthly
Log Action at End of Frequency	Determine and set how the printer responds when the frequency threshold expires.
None	Note: None is the factory default setting.
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Disk Near Full Level	Specify the maximum size of the log file before the printer executes Disk Near Full
Off	Action.
1–99	Note: 5 is the factory default setting.